|
Task
or Activity |
User
just wants to use Desktop program |
User
wants to use Palm device with Desktop
program |
|
Download eKnit-Kards program from
website |
Yes, download
(and save to a known location on your drive) |
Yes, download
(and save to a known location on your drive) |
|
Backup Palm by Hotsyncing |
No |
Yes |
|
Install Sat Forms Installer Locate
"Sat Forms" Folder in the file that you
downloaded and run Setup in that folder |
No |
Yes |
|
Install eKnit-Kards Desktop Locate
and run Setup.exe in the main folder of the
file that you downloaded (not the one in the
Sat Forms folder) |
Yes |
Yes |
|
After installing eKnit-Kards, you're
done! Enjoy the software |
Yes |
No |
|
After installing eKnit-Kards, you
need to access your Palm for the first time |
No |
Yes |
|
Connect your Palm to computer (backup
data if you have not done so already) |
|
Yes |
|
Navigate to the Main menu -
Locate the top menubar within eKnit-Kards
Desktop and tap the "Sync Palm" button |
|
- Yes
- You must have already installed the
Sat Forms Installer for this step to
work
|
| Make sure your Palm is not
on an eKnit-Kards screen. Go to your
calendar or any other screen. |
|
Yes |
|
Follow all of the instructions and go
through 6 sync cycles |
|
Yes |
-
IMPORTANT
- On the last sync, decide whether to
send your Palm data to Desktop or vice
versa
|
|
Yes If a
Hotsync screen fails to close after Hotsync
finishes, tap abort and continue |
|
After installation, check both
desktop and Palm to verify that data
transferred properly. |
|
Yes |
| Press the "Sync" button
after selecting Sync Palm for all future
syncs. This will be a normal 2 way sync. The
other sync buttons are for one way syncs and
will erase all other eKnit-Kards data on the
receiving device. Only used after a
catastrophic loss of data on hard drive or
Palm. |
|
Yes |
|
Now,
enjoy the program! |
Yes |
Yes |
